Cupra Formentor MOT pass rate and common problems
93.0% of 12,446 Cupra Formentor MOT tests pass.
The Formentor's pass rate of 93.0% is in line with the average across all Cupra models, at 92.4%.
The Cupra Formentor passes its MOT 93.0% of the time — well above the national average for cars, which sits at 79.2%.
Own this Cupra Formentor?
This is the average across every Cupra Formentor in the dataset. Look up your own registration for its actual MOT history, and a free place to keep its maintenance records.
Have service invoices? Upload and keep them with your car’s history →
How to check and keep your Cupra’s service history →
Pass rate by vehicle age
Pass rate eases gradually with age, from 94.0% at 0–3 years to 90.5% at 3–6 years.
| Vehicle age | Pass rate | Tests | Average mileage |
|---|---|---|---|
| 0–3 years | 94.0% | 9,076 | 26,986 miles |
| 3–6 years | 90.5% | 3,370 | 28,638 miles |
| 6–10 years | no tests recorded | 0 | no reading |
| 10–15 years | no tests recorded | 0 | no reading |
| 15+ years | no tests recorded | 0 | no reading |
Common MOT failure reasons for the Cupra Formentor
The most common reason the Cupra Formentor fails its MOT is tyres — present in 51.6% of failed tests, most often logged as "Tread depth below requirements of 1.6mm".
| Category | Share of failed tests | Example |
|---|---|---|
| Tyres | 51.6% | Tread depth below requirements of 1.6mm |
| Suspension | 17.5% | Has a serious fluid leak |
| Lamps, reflectors and electrical equipment | 15.2% | Too high |
| Visibility | 14.1% | Does not clear the windscreen effectively |
| Brakes | 8.8% | Less than 1.5 mm thick |
| Seat belts and supplementary restraint systems | 5.2% | Warning lamp indicates a fault |
| Noise, emissions and leaks | 4.4% | Inoperative or indicates a malfunction |
| Identification of the vehicle | 3.1% | Does not conform to the specified requirements |
| Road Wheels | 1.1% | Fixing missing |
| Body, chassis, structure | 0.7% | Constant velocity boot split or insecure, no longer prevents the ingress of dirt |
Buying a used Cupra Formentor: what to check
These checks follow the Cupra Formentor’s own MOT record: the areas it fails on most often, and how that changes as the car gets older. None of them replaces a mechanic’s inspection, but they tell you where to look first.
The biggest drop in pass rate for the Cupra Formentor comes between 0–3 years and 3–6 years old, from 94.0% to 90.5%. If you are looking at one in or just past that range, read its MOT history closely.
By mileage, the steepest fall is from 0–30,000 mi to 30,000–60,000 mi: 94.1% down to 91.0%. Mileage matters as well as age, so compare the car’s recorded mileages with its year.
1. Tyres
Recorded in 51.6% of failed Cupra Formentor MOTs.
Check tread depth across the whole width of every tyre, including the inner edge. Uneven wear can point to alignment or suspension problems. Look for cuts and bulges in the sidewalls.
2. Suspension
Recorded in 17.5% of failed Cupra Formentor MOTs. 3.1% of tests at 3–6 years failed on suspension, against 1.0% at 0–3 years.
Listen for knocks over bumps and speed humps, and check the car sits level. Push down on each corner: it should settle rather than keep bouncing.
3. Lights and electrics
Recorded in 15.2% of failed Cupra Formentor MOTs.
Walk round with the lights on: headlights (dipped and main), indicators, brake lights, fog light and number-plate lamp. Check the dashboard warning lights come on with the ignition, then go out once the engine starts.
4. Windscreen and wipers
Recorded in 14.1% of failed Cupra Formentor MOTs.
Look for windscreen chips and cracks in the driver’s line of sight, and check the wipers clear the screen and the washers work.
5. Brakes
Recorded in 8.8% of failed Cupra Formentor MOTs. 1.5% of tests at 3–6 years failed on brakes, against 0.5% at 0–3 years.
On the test drive, the car should stop straight without pulling or juddering, and the handbrake should hold it on a slope. Look through the wheels for scored or heavily lipped discs.
Check the car’s own MOT history. Averages describe the model, not the car in front of you. Look up its registration for past failures, advisories that were never fixed, and gaps or dips in the recorded mileage.
Ask for the service history. Invoices show what was done and when; a stamp alone shows less. See how to check Cupra service history and what a service history check can tell you.
Related Cupra models
- Cupra Leon — 86.0% pass rate
Frequently asked questions
- What is the MOT pass rate for the Cupra Formentor?
- 93.0% of Cupra Formentor MOT tests pass, based on 12,446 tests in the DVSA anonymised MOT tests and results dataset.
- What are the most common MOT failures for the Cupra Formentor?
- The most common reason the Cupra Formentor fails its MOT is tyres — present in 51.6% of failed tests, most often logged as "Tread depth below requirements of 1.6mm".
- What are the common problems with the Cupra Formentor?
- Going by its MOT results, the most common problem areas on the Cupra Formentor are tyres; suspension; lights and electrics.
- What should I check when buying a used Cupra Formentor?
- Start with the areas it most often fails its MOT on: tyres; suspension; lights and electrics; windscreen and wipers; brakes. Then check the specific car's MOT history by registration for failures, advisories and mileage, and ask the seller for service invoices.
- Does this show the Cupra Formentor's service history?
- No — this is MOT test data, which covers roadworthiness, not servicing. A service history is a separate record of maintenance work, which a specific car only has if its owner has kept it. See the Cupra service history guide for how to check and keep one.