Audi Q2 MOT pass rate and common problems
93.3% of 132,363 Audi Q2 MOT tests pass.
The Q2 passes its MOT 93.3% of the time — well above the average across all Audi models, which sits at 84.5%.
The Audi Q2 passes its MOT 93.3% of the time — well above the national average for cars, which sits at 79.2%.
Own this Audi Q2?
This is the average across every Audi Q2 in the dataset. Look up your own registration for its actual MOT history, and a free place to keep its maintenance records.
Have service invoices? Upload and keep them with your car’s history →
How to check and keep your Audi’s service history →
Pass rate by vehicle age
Pass rate eases gradually with age, from 95.2% at 0–3 years to 91.4% at 6–10 years.
| Vehicle age | Pass rate | Tests | Average mileage |
|---|---|---|---|
| 0–3 years | 95.2% | 21,456 | 23,713 miles |
| 3–6 years | 93.5% | 80,330 | 35,567 miles |
| 6–10 years | 91.4% | 30,565 | 51,187 miles |
| 10–15 years | too few tests (12) | 12 | no reading |
| 15+ years | no tests recorded | 0 | no reading |
Common MOT failure reasons for the Audi Q2
The most common reason the Audi Q2 fails its MOT is tyres — present in 51.4% of failed tests, most often logged as "Tread depth below requirements of 1.6mm".
| Category | Share of failed tests | Example |
|---|---|---|
| Tyres | 51.4% | Tread depth below requirements of 1.6mm |
| Brakes | 23.6% | Less than 1.5 mm thick |
| Lamps, reflectors and electrical equipment | 19.0% | Too low |
| Visibility | 11.6% | Provides insufficient washer liquid |
| Suspension | 3.6% | Has a serious fluid leak |
| Identification of the vehicle | 3.6% | Does not conform to the specified requirements |
| Noise, emissions and leaks | 3.1% | Inoperative or indicates a malfunction |
| Seat belts and supplementary restraint systems | 2.7% | Warning lamp indicates a fault |
| Road Wheels | 1.9% | Fixing missing |
| Body, chassis, structure | 1.6% | Constant velocity boot split or insecure, no longer prevents the ingress of dirt |
Buying a used Audi Q2: what to check
These checks follow the Audi Q2’s own MOT record: the areas it fails on most often, and how that changes as the car gets older. None of them replaces a mechanic’s inspection, but they tell you where to look first.
The biggest drop in pass rate for the Audi Q2 comes between 3–6 years and 6–10 years old, from 93.5% to 91.4%. If you are looking at one in or just past that range, read its MOT history closely.
By mileage, the steepest fall is from 0–30,000 mi to 30,000–60,000 mi: 95.7% down to 92.2%. Mileage matters as well as age, so compare the car’s recorded mileages with its year.
1. Tyres
Recorded in 51.4% of failed Audi Q2 MOTs.
Check tread depth across the whole width of every tyre, including the inner edge. Uneven wear can point to alignment or suspension problems. Look for cuts and bulges in the sidewalls.
2. Brakes
Recorded in 23.6% of failed Audi Q2 MOTs. 3.5% of tests at 6–10 years failed on brakes, against 0.7% at 0–3 years.
On the test drive, the car should stop straight without pulling or juddering, and the handbrake should hold it on a slope. Look through the wheels for scored or heavily lipped discs.
3. Lights and electrics
Recorded in 19.0% of failed Audi Q2 MOTs.
Walk round with the lights on: headlights (dipped and main), indicators, brake lights, fog light and number-plate lamp. Check the dashboard warning lights come on with the ignition, then go out once the engine starts.
4. Windscreen and wipers
Recorded in 11.6% of failed Audi Q2 MOTs.
Look for windscreen chips and cracks in the driver’s line of sight, and check the wipers clear the screen and the washers work.
5. Suspension
Recorded in 3.6% of failed Audi Q2 MOTs.
Listen for knocks over bumps and speed humps, and check the car sits level. Push down on each corner: it should settle rather than keep bouncing.
Check the car’s own MOT history. Averages describe the model, not the car in front of you. Look up its registration for past failures, advisories that were never fixed, and gaps or dips in the recorded mileage.
Ask for the service history. Invoices show what was done and when; a stamp alone shows less. See how to check Audi service history and what a service history check can tell you.
Related Audi models
- Audi A6 — 85.3% pass rate
- Audi TT — 83.4% pass rate
- Audi Q5 — 88.8% pass rate
- Audi Q7 — 87.9% pass rate
- Audi A7 — 89.7% pass rate
- Audi E-Tron — 92.7% pass rate
Frequently asked questions
- What is the MOT pass rate for the Audi Q2?
- 93.3% of Audi Q2 MOT tests pass, based on 132,363 tests in the DVSA anonymised MOT tests and results dataset.
- What are the most common MOT failures for the Audi Q2?
- The most common reason the Audi Q2 fails its MOT is tyres — present in 51.4% of failed tests, most often logged as "Tread depth below requirements of 1.6mm".
- What are the common problems with the Audi Q2?
- Going by its MOT results, the most common problem areas on the Audi Q2 are tyres; brakes; lights and electrics.
- What should I check when buying a used Audi Q2?
- Start with the areas it most often fails its MOT on: tyres; brakes; lights and electrics; windscreen and wipers; suspension. Then check the specific car's MOT history by registration for failures, advisories and mileage, and ask the seller for service invoices.
- Does this show the Audi Q2's service history?
- No — this is MOT test data, which covers roadworthiness, not servicing. A service history is a separate record of maintenance work, which a specific car only has if its owner has kept it. See the Audi service history guide for how to check and keep one.