Audi RSQ3 MOT pass rate and common problems
94.9% of 4,401 Audi RSQ3 MOT tests pass.
The RSQ3 passes its MOT 94.9% of the time — well above the average across all Audi models, which sits at 84.5%.
The Audi RSQ3 passes its MOT 94.9% of the time — well above the national average for cars, which sits at 79.2%.
Own this Audi RSQ3?
This is the average across every Audi RSQ3 in the dataset. Look up your own registration for its actual MOT history, and a free place to keep its maintenance records.
Have service invoices? Upload and keep them with your car’s history →
How to check and keep your Audi’s service history →
Pass rate by vehicle age
Pass rate declines noticeably with age, from 95.3% at 0–3 years to 81.3% at 6–10 years.
| Vehicle age | Pass rate | Tests | Average mileage |
|---|---|---|---|
| 0–3 years | 95.3% | 1,288 | 23,184 miles |
| 3–6 years | 95.1% | 3,037 | 30,060 miles |
| 6–10 years | 81.3% | 64 | 61,792 miles |
| 10–15 years | too few tests (12) | 12 | no reading |
| 15+ years | no tests recorded | 0 | no reading |
Common MOT failure reasons for the Audi RSQ3
The most common reason the Audi RSQ3 fails its MOT is tyres — present in 71.2% of failed tests, most often logged as "Has a cut in excess of the requirements deep enough to reach the ply or cords".
| Category | Share of failed tests | Example |
|---|---|---|
| Tyres | 71.2% | Has a cut in excess of the requirements deep enough to reach the ply or cords |
| Visibility | 12.7% | Not working |
| Noise, emissions and leaks | 11.5% | Lambda reading after 2nd fast idle outside specified limits |
| Identification of the vehicle | 10.8% | Does not conform to the specified requirements |
| Lamps, reflectors and electrical equipment | 10.4% | For led or hid headlamp inoperative |
| Brakes | 7.7% | Less than 1.5 mm thick |
| Suspension | 2.7% | Fractured or broken |
| Seat belts and supplementary restraint systems | 0.4% | Buckle not functioning as intended |
| Body, chassis, structure | 0.4% | Constant velocity boot split or insecure, no longer prevents the ingress of dirt |
Buying a used Audi RSQ3: what to check
These checks follow the Audi RSQ3’s own MOT record: the areas it fails on most often, and how that changes as the car gets older. None of them replaces a mechanic’s inspection, but they tell you where to look first.
The biggest drop in pass rate for the Audi RSQ3 comes between 3–6 years and 6–10 years old, from 95.1% to 81.3%. If you are looking at one in or just past that range, read its MOT history closely.
By mileage, the steepest fall is from 30,000–60,000 mi to 60,000–90,000 mi: 93.8% down to 88.2%. Mileage matters as well as age, so compare the car’s recorded mileages with its year.
1. Tyres
Recorded in 71.2% of failed Audi RSQ3 MOTs.
Check tread depth across the whole width of every tyre, including the inner edge. Uneven wear can point to alignment or suspension problems. Look for cuts and bulges in the sidewalls.
2. Windscreen and wipers
Recorded in 12.7% of failed Audi RSQ3 MOTs.
Look for windscreen chips and cracks in the driver’s line of sight, and check the wipers clear the screen and the washers work.
3. Exhaust, emissions and leaks
Recorded in 11.5% of failed Audi RSQ3 MOTs. 3.1% of tests at 6–10 years failed on exhaust, emissions and leaks, against 0.6% at 0–3 years.
Look under the car for fresh oil or coolant, and listen for blows or rattles from the exhaust. Watch for smoke from the tailpipe when the engine starts and when you accelerate.
4. Number plates and VIN
Recorded in 10.8% of failed Audi RSQ3 MOTs. Rare on young cars, but 9.4% of tests at 6–10 years failed on number plates and vin.
Match the registration plates and the VIN (usually at the base of the windscreen and on a door pillar) to the V5C.
5. Lights and electrics
Recorded in 10.4% of failed Audi RSQ3 MOTs. Rare on young cars, but 3.1% of tests at 6–10 years failed on lights and electrics.
Walk round with the lights on: headlights (dipped and main), indicators, brake lights, fog light and number-plate lamp. Check the dashboard warning lights come on with the ignition, then go out once the engine starts.
Check the car’s own MOT history. Averages describe the model, not the car in front of you. Look up its registration for past failures, advisories that were never fixed, and gaps or dips in the recorded mileage.
Ask for the service history. Invoices show what was done and when; a stamp alone shows less. See how to check Audi service history and what a service history check can tell you.
Related Audi models
- Audi RS6 — 93.6% pass rate
- Audi S4 — 90.6% pass rate
- Audi S5 — 87.6% pass rate
- Audi RS4 — 91.4% pass rate
- Audi SQ5 — 93.8% pass rate
- Audi SQ7 — 93.4% pass rate
Frequently asked questions
- What is the MOT pass rate for the Audi RSQ3?
- 94.9% of Audi RSQ3 MOT tests pass, based on 4,401 tests in the DVSA anonymised MOT tests and results dataset.
- What are the most common MOT failures for the Audi RSQ3?
- The most common reason the Audi RSQ3 fails its MOT is tyres — present in 71.2% of failed tests, most often logged as "Has a cut in excess of the requirements deep enough to reach the ply or cords".
- What are the common problems with the Audi RSQ3?
- Going by its MOT results, the most common problem areas on the Audi RSQ3 are tyres; windscreen and wipers; exhaust, emissions and leaks.
- What should I check when buying a used Audi RSQ3?
- Start with the areas it most often fails its MOT on: tyres; windscreen and wipers; exhaust, emissions and leaks; number plates and vin; lights and electrics. Then check the specific car's MOT history by registration for failures, advisories and mileage, and ask the seller for service invoices.
- Does this show the Audi RSQ3's service history?
- No — this is MOT test data, which covers roadworthiness, not servicing. A service history is a separate record of maintenance work, which a specific car only has if its owner has kept it. See the Audi service history guide for how to check and keep one.