Hyundai Kona SE Connect MOT pass rate and common problems
90.9% of 3,590 Hyundai Kona SE Connect MOT tests pass.
The Kona SE Connect passes its MOT 90.9% of the time — well above the average across all Hyundai models, which sits at 79.7%.
The Hyundai Kona SE Connect passes its MOT 90.9% of the time — well above the national average for cars, which sits at 79.2%.
Own this Hyundai Kona SE Connect?
This is the average across every Hyundai Kona SE Connect in the dataset. Look up your own registration for its actual MOT history, and a free place to keep its maintenance records.
Have service invoices? Upload and keep them with your car’s history →
How to check and keep your Hyundai’s service history →
Pass rate by vehicle age
Pass rate stays relatively stable with age: 91.0% at 0–3 years versus 90.3% at 3–6 years.
| Vehicle age | Pass rate | Tests | Average mileage |
|---|---|---|---|
| 0–3 years | 91.0% | 2,907 | 23,824 miles |
| 3–6 years | 90.3% | 683 | 26,535 miles |
| 6–10 years | no tests recorded | 0 | no reading |
| 10–15 years | no tests recorded | 0 | no reading |
| 15+ years | no tests recorded | 0 | no reading |
Common MOT failure reasons for the Hyundai Kona SE Connect
The most common reason the Hyundai Kona SE Connect fails its MOT is visibility — present in 41.4% of failed tests, most often logged as "Does not clear the windscreen effectively".
| Category | Share of failed tests | Example |
|---|---|---|
| Visibility | 41.4% | Does not clear the windscreen effectively |
| Tyres | 33.8% | Has a cut in excess of the requirements deep enough to reach the ply or cords |
| Lamps, reflectors and electrical equipment | 23.3% | Too high |
| Brakes | 16.3% | Control defective so that it cannot be satisfactorily operated |
| Suspension | 5.5% | Pin or bush excessively worn |
| Noise, emissions and leaks | 2.3% | Inoperative or indicates a malfunction |
| Identification of the vehicle | 1.3% | Does not conform to the specified requirements |
| Steering | 0.8% | Ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |
| Seat belts and supplementary restraint systems | 0.6% | Warning lamp indicates a fault |
| Body, chassis, structure | 0.6% | Cannot be secured in the closed position |
Buying a used Hyundai Kona SE Connect: what to check
These checks follow the Hyundai Kona SE Connect’s own MOT record: the areas it fails on most often, and how that changes as the car gets older. None of them replaces a mechanic’s inspection, but they tell you where to look first.
By mileage, the steepest fall is from 30,000–60,000 mi to 60,000–90,000 mi: 87.2% down to 80.0%. Mileage matters as well as age, so compare the car’s recorded mileages with its year.
1. Windscreen and wipers
Recorded in 41.4% of failed Hyundai Kona SE Connect MOTs.
Look for windscreen chips and cracks in the driver’s line of sight, and check the wipers clear the screen and the washers work.
2. Tyres
Recorded in 33.8% of failed Hyundai Kona SE Connect MOTs.
Check tread depth across the whole width of every tyre, including the inner edge. Uneven wear can point to alignment or suspension problems. Look for cuts and bulges in the sidewalls.
3. Lights and electrics
Recorded in 23.3% of failed Hyundai Kona SE Connect MOTs.
Walk round with the lights on: headlights (dipped and main), indicators, brake lights, fog light and number-plate lamp. Check the dashboard warning lights come on with the ignition, then go out once the engine starts.
4. Brakes
Recorded in 16.3% of failed Hyundai Kona SE Connect MOTs.
On the test drive, the car should stop straight without pulling or juddering, and the handbrake should hold it on a slope. Look through the wheels for scored or heavily lipped discs.
5. Suspension
Recorded in 5.5% of failed Hyundai Kona SE Connect MOTs.
Listen for knocks over bumps and speed humps, and check the car sits level. Push down on each corner: it should settle rather than keep bouncing.
Check the car’s own MOT history. Averages describe the model, not the car in front of you. Look up its registration for past failures, advisories that were never fixed, and gaps or dips in the recorded mileage.
Ask for the service history. Invoices show what was done and when; a stamp alone shows less. See how to check Hyundai service history and what a service history check can tell you.
Related Hyundai models
- Hyundai Matrix — 59.4% pass rate
- Hyundai i20 SE Connect — 91.8% pass rate
- Hyundai Veloster — 69.0% pass rate
- Hyundai Accent — 58.4% pass rate
- Hyundai Terracan — 67.8% pass rate
- Hyundai i20 Element — 92.2% pass rate
Frequently asked questions
- What is the MOT pass rate for the Hyundai Kona SE Connect?
- 90.9% of Hyundai Kona SE Connect MOT tests pass, based on 3,590 tests in the DVSA anonymised MOT tests and results dataset.
- What are the most common MOT failures for the Hyundai Kona SE Connect?
- The most common reason the Hyundai Kona SE Connect fails its MOT is visibility — present in 41.4% of failed tests, most often logged as "Does not clear the windscreen effectively".
- What are the common problems with the Hyundai Kona SE Connect?
- Going by its MOT results, the most common problem areas on the Hyundai Kona SE Connect are windscreen and wipers; tyres; lights and electrics.
- What should I check when buying a used Hyundai Kona SE Connect?
- Start with the areas it most often fails its MOT on: windscreen and wipers; tyres; lights and electrics; brakes; suspension. Then check the specific car's MOT history by registration for failures, advisories and mileage, and ask the seller for service invoices.
- Does this show the Hyundai Kona SE Connect's service history?
- No — this is MOT test data, which covers roadworthiness, not servicing. A service history is a separate record of maintenance work, which a specific car only has if its owner has kept it. See the Hyundai service history guide for how to check and keep one.