Peugeot 407 MOT pass rate and common problems
62.3% of 13,457 Peugeot 407 MOT tests pass.
The 407 passes 62.3% of the time, noticeably below the figure for the average across all Peugeot models (74.1%).
The Peugeot 407 passes 62.3% of the time, noticeably below the figure for the national average for cars (79.2%).
Own this Peugeot 407?
This is the average across every Peugeot 407 in the dataset. Look up your own registration for its actual MOT history, and a free place to keep its maintenance records.
Have service invoices? Upload and keep them with your car’s history →
How to check and keep your Peugeot’s service history →
Pass rate by vehicle age
Pass rate eases gradually with age, from 64.7% at 10–15 years to 61.6% at 15+ years.
| Vehicle age | Pass rate | Tests | Average mileage |
|---|---|---|---|
| 0–3 years | no tests recorded | 0 | no reading |
| 3–6 years | no tests recorded | 0 | no reading |
| 6–10 years | no tests recorded | 0 | no reading |
| 10–15 years | 64.7% | 3,051 | 120,600 miles |
| 15+ years | 61.6% | 10,406 | 125,095 miles |
Common MOT failure reasons for the Peugeot 407
The most common reason the Peugeot 407 fails its MOT is lamps, reflectors and electrical equipment — present in 67.3% of failed tests, most often logged as "Not working".
| Category | Share of failed tests | Example |
|---|---|---|
| Lamps, reflectors and electrical equipment | 67.3% | Not working |
| Brakes | 47.5% | Warning lamp indicates an abs fault |
| Suspension | 38.5% | Ball joint excessively worn |
| Body, chassis, structure | 25.7% | Constant velocity boot split or insecure, no longer prevents the ingress of dirt |
| Tyres | 23.6% | Tread depth below requirements of 1.6mm |
| Visibility | 18.1% | Provides insufficient washer liquid |
| Noise, emissions and leaks | 12.1% | Emissions exceed manufacturer's specified limit |
| Steering | 7.2% | Gaiter missing or no longer prevents the ingress of dirt |
| Seat belts and supplementary restraint systems | 3.2% | Prescribed area strength or continuity significantly reduced |
| Road Wheels | 2.2% | Fixing missing |
Buying a used Peugeot 407: what to check
These checks follow the Peugeot 407’s own MOT record: the areas it fails on most often, and how that changes as the car gets older. None of them replaces a mechanic’s inspection, but they tell you where to look first.
The biggest drop in pass rate for the Peugeot 407 comes between 10–15 years and 15+ years old, from 64.7% to 61.6%. If you are looking at one in or just past that range, read its MOT history closely.
By mileage, the steepest fall is from 30,000–60,000 mi to 60,000–90,000 mi: 81.5% down to 69.1%. Mileage matters as well as age, so compare the car’s recorded mileages with its year.
1. Lights and electrics
Recorded in 67.3% of failed Peugeot 407 MOTs.
Walk round with the lights on: headlights (dipped and main), indicators, brake lights, fog light and number-plate lamp. Check the dashboard warning lights come on with the ignition, then go out once the engine starts.
2. Brakes
Recorded in 47.5% of failed Peugeot 407 MOTs. 25.1% of tests at 15+ years failed on brakes, against 10.9% at 10–15 years.
On the test drive, the car should stop straight without pulling or juddering, and the handbrake should hold it on a slope. Look through the wheels for scored or heavily lipped discs.
3. Suspension
Recorded in 38.5% of failed Peugeot 407 MOTs.
Listen for knocks over bumps and speed humps, and check the car sits level. Push down on each corner: it should settle rather than keep bouncing.
4. Bodywork and corrosion
Recorded in 25.7% of failed Peugeot 407 MOTs.
Look underneath and along the sills for corrosion, especially near suspension and seat-belt mountings. Uneven panel gaps or mismatched paint can indicate accident repair.
5. Tyres
Recorded in 23.6% of failed Peugeot 407 MOTs.
Check tread depth across the whole width of every tyre, including the inner edge. Uneven wear can point to alignment or suspension problems. Look for cuts and bulges in the sidewalls.
Check the car’s own MOT history. Averages describe the model, not the car in front of you. Look up its registration for past failures, advisories that were never fixed, and gaps or dips in the recorded mileage.
Ask for the service history. Invoices show what was done and when; a stamp alone shows less. See how to check Peugeot service history and what a service history check can tell you.
Related Peugeot models
- Peugeot 508 — 78.7% pass rate
- Peugeot Bipper — 65.9% pass rate
- Peugeot RCZ — 75.1% pass rate
- Peugeot Horizon — 77.7% pass rate
- Peugeot Rifter — 87.9% pass rate
- Peugeot 106 — 63.3% pass rate
Frequently asked questions
- What is the MOT pass rate for the Peugeot 407?
- 62.3% of Peugeot 407 MOT tests pass, based on 13,457 tests in the DVSA anonymised MOT tests and results dataset.
- What are the most common MOT failures for the Peugeot 407?
- The most common reason the Peugeot 407 fails its MOT is lamps, reflectors and electrical equipment — present in 67.3% of failed tests, most often logged as "Not working".
- What are the common problems with the Peugeot 407?
- Going by its MOT results, the most common problem areas on the Peugeot 407 are lights and electrics; brakes; suspension.
- What should I check when buying a used Peugeot 407?
- Start with the areas it most often fails its MOT on: lights and electrics; brakes; suspension; bodywork and corrosion; tyres. Then check the specific car's MOT history by registration for failures, advisories and mileage, and ask the seller for service invoices.
- Does this show the Peugeot 407's service history?
- No — this is MOT test data, which covers roadworthiness, not servicing. A service history is a separate record of maintenance work, which a specific car only has if its owner has kept it. See the Peugeot service history guide for how to check and keep one.